Inconel X-750 Round Bar

  • Home
  • Inconel X-750 Round Bar

Buy Large Or Small Quantity Inconel X-750 Round Bar, Inconel N07750 Rods, Alloy X-750 Bar Stock, X-750 Inconel Bars, Inconel X-750 Hex Bar, UNS N07750 Round Bars, X-750 Inconel Alloy Round Bars Supplier in Mumbai, India.

ASTM B637 Alloy X-750 Bright Bar Manufacturer, Werkstoff Nr. 2.4669 Bars, Inconel X-750 Round Bar, Inconel X-750 Flat Bars, Inconel Alloy X-750 Square Bar, Inconel 2.4669 Hollow Bar, Inconel X-750 Forged Bar Manufacturer in India.

Inconel X-750 Round Bar

Jade Special Metals is a well-known seller of Inconel Alloy X-750 Round Bars, which permits easy access to vessels or piping systems for inspection purposes. Meanwhile, Inconel X-750 Flat Bars is usually in the shape of a disc and is used to connect two tubes together or to connect a pipe or other component. Inconel X-750 Square Bars has some excellent features to offer such as durable, accurate composition, sturdier and more. These Inconel X-750 Threaded Bars are also manufactured and designed using excellent quality of raw material and cutting-edge technology by our expert specialists. These Inconel X-750 Hollow Bars are in fact mass-produced at our end by using superior grade of stainless steel in agreement through the international quality standards. Extensively used in dissimilar sectors and industries for making diverse kinds of materials, these Inconel X-750 Hexagonal Bars are specifically factory-made by our specialists making use of premium grade alloys. These Inconel X-750 Triangular Bars are acknowledged for optimum performance, high tensile strength, corrosion & temperature resistant and longer service life. Inconel X-750 Bars is a plate for covering or closing the end of a pipe, which are supplied in the market in safe mode. Inconel WNR 2.4669 Round Bars without a bore and is used to shut off a piping system or vessel opening. These Inconel UNS N07750 Round Bars are used in many, different fields, such as the transport (pipelines, ships) of petroleum, gas, water, etc.

Inconel X-750 Round Bars Specifications

Standard ASTM B637 / ASME SB637, AMS 5669, AMS 5698, AMS 5699
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Rectangular Bars Section 3.0 to 12.0mm thickness
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangular Size 33 x 30mm to 295 x 1066mm
Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed
Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing Bar cutting to 650mm
Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.

Alloy X-750 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

“Contact Jade Special Metals today with your requirement for Inconel X-750 Round Bars and Alloy X-750 Rods. We assure you of the best quote.

Inconel X-750 Round Bars Equivalent Standard Grade

Inconel X-750 2.4669 N07750

Inconel X-750 Round Bars Inventory

Hexagonal Bar
Inconel X-750 Hex Bar
Square Bar
Inconel X-750 Square Bar
Bright Bar
Inconel X-750 Bright Bar
Threaded Bar
Inconel X-750 Threaded Bar
Flat Bar
Inconel X-750 Flat Bar
Rectangular Bar
Inconel X-750 Rectangular Bar

Inconel X-750 Round Bar Chemical Composition

Grade C Mn Si Cu S Al Ti Ni Cr
Inconel X-750 0.08 max 1 max 0.50 max 0.50 max 0.01 max 0.40 – 1.0 2.25 – 2.75 70 min 14 – 17

Inconel Alloy X-750 Round Bars Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.28 g/cm3 1430°C 1267 MPa 868 MPa 25 %

Available Stock of ASTM B637 Alloy X-750 Round Bars

  • Inconel X-750 Cold Drawn Bars
  • Alloy X-750 Hexagonal Bar
  • X-750 Inconel Square Bars
  • UNS N07750 Round Bar
  • WERKSTOFF NR. 2.4669 Bars
  • ASTM B637 Inconel X-750 Polished Bar
  • Inconel X-750 Rectangular Bar
  • Inconel X-750 Forged Bars
  • Alloy X-750 Half-Round Bar
  • ASTM B637 Type X-750 Hex Bar
  • X-750 Inconel Flat Bar
  • UNS N07750 Rods
  • WERKSTOFF NR. 2.4669 Triangle Bar
  • ASME SB637 Alloy X-750 Bright Bar
  • ASTM B637 Alloy X-750 Precision Ground Bar
  • Inconel X-750 Bright Round Bar
  • Inconel X-750 Threaded Bars
  • X-750 Inconel Hollow Bar
  • Inconel X-750 Rods
  • UNS N07750 Flat Bars Supplier
  • WERKSTOFF NR. 2.4669 Flat Bars
  • Inconel Alloy X-750 Round Bar
  • Alloy X-750 Cold Drawn Round Bar
  • Inconel X-750 Bars Manufacturer
  • X-750 Inconel Hex Bars
  • ASTM B637 Type X-750 Cold Rolled Bar
  • X-750 Inconel Bar Distributor
  • UNS N07750 Square Bar Exporter
  • WERKSTOFF NR. 2.4669 Bright Bar
  • ASTM B637 Type X-750 Flat Bar Rolled Edge
  • ASME SB637 Inconel X-750 Bar
  • 2.4669 Inconel Rods
  • Alloy X-750 Black Bar Stockist
  • Inconel X-750 Round Bar Price

Applications of Alloy X-750 Round Bars

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry

We maintain ready stock of X-750 Inconel Round Bar, Alloy X-750 Hex Bar, Inconel X-750 Square Bar, Alloy X-750 Bright Bar, Inconel Alloy X-750 Flat Bar and X-750 Inconel Rods. Get in touch with us with your requirement for quick quote.