Inconel 718 Round Bar

  • Home
  • Inconel 718 Round Bar

Inconel 718 Hex Bar, UNS N07718 Round Bars, Inconel N07718 Rods, Alloy 718 Bar Stock, 718 Inconel Bars, Buy Large Or Small Quantity Inconel 718 Round Bar, 718 Inconel Alloy Round Bars Supplier in Mumbai, India.

Inconel 718 Round Bar, Werkstoff Nr. 2.4668 Bars, ASTM B637 Alloy 718 Bright Bar Manufacturer, Inconel 718 Flat Bars, Inconel Alloy 718 Square Bar, Inconel 2.4668 Hollow Bar, Inconel 718 Forged Bar Manufacturer in India.

Inconel 718 Round Bar

Jade Special Metals is a well-known distributor of Inconel Alloy 718 Round Bars, which has a face called a gasket contact surface that is considered the most important portion of an alloy. Our manufacturing facilities for Inconel 718 Flat Bars are used in power generation, chemicals, and chemical fertilizers. These Inconel 718 Square Bars are of various kinds in type and shape, and their material too is diversified in accordance with the type of fluid and service environment. Inconel 718 Threaded Bars is stringently checked on varied parameters to ensure delivery of only defect free products. Meanwhile, the calculated strength from Inconel 718 Hollow Bars under internal pressure is of the order of two-thirds that of others, and their life under fatigue is about one-third that of the latter. These Inconel 718 Hexagonal Bars are strong and durable, and are stringently made from the experts of the industry. The reason for this is that the contact surfaces of Inconel 718 Triangular Bars do not match and there is no gasket that has one type on one side and another type on the other side. The function of Inconel 718 Bars is to provide access to a line for metering of gases or liquids. Inconel UNS N07718 Round Bars is clamped between a pair of alloys when installed in a line and the whole assembly is referred to as an orifice flange union.

Inconel 718 Round Bars Specifications

Standard ASTM B637 / ASME SB637
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Rectangular Bars Section 3.0 to 12.0mm thickness
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangular Size 33 x 30mm to 295 x 1066mm
Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed
Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing Bar cutting to 650mm
Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.

Alloy 718 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

“Contact Jade Special Metals today with your requirement for Inconel 718 Round Bars and Alloy 718 Rods. We assure you of the best quote.

Inconel 718 Round Bars Equivalent Standard Grade

Inconel 718 2.4668 N07718 NCF 718

Inconel 718 Round Bars Inventory

Hexagonal Bar
Inconel 718 Hex Bar
Square Bar
Inconel 718 Square Bar
Bright Bar
Inconel 718 Bright Bar
Threaded Bar
Inconel 718 Threaded Bar
Flat Bar
Inconel 718 Flat Bar
Rectangular Bar
Inconel 718 Rectangular Bar

Inconel 718 Round Bar Chemical Composition

Grade C Mn Si Cu S Fe Mo Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.30 max 0.15 min 50 – 55 17 – 21

Inconel Alloy 718 Round Bars Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Available Stock of ASTM B637 Alloy 718 Round Bars

  • Inconel 718 Cold Drawn Bars
  • Alloy 718 Hexagonal Bar
  • 718 Inconel Square Bars
  • UNS N07718 Round Bar
  • WERKSTOFF NR. 2.4668 Bars
  • ASTM B637 Inconel 718 Polished Bar
  • Inconel 718 Rectangular Bar
  • Inconel 718 Forged Bars
  • Alloy 718 Half-Round Bar
  • ASTM B637 Type 718 Hex Bar
  • 718 Inconel Flat Bar
  • UNS N07718 Rods
  • WERKSTOFF NR. 2.4668 Triangle Bar
  • ASME SB637 Alloy 718 Bright Bar
  • ASTM B637 Alloy 718 Precision Ground Bar
  • Inconel 718 Bright Round Bar
  • Inconel 718 Threaded Bars
  • 718 Inconel Hollow Bar
  • Inconel 718 Rods
  • UNS N07718 Flat Bars Supplier
  • WERKSTOFF NR. 2.4668 Flat Bars
  • Inconel Alloy 718 Round Bar
  • Alloy 718 Cold Drawn Round Bar
  • Inconel 718 Bars Manufacturer
  • 718 Inconel Hex Bars
  • ASTM B637 Type 718 Cold Rolled Bar
  • 718 Inconel Bar Distributor
  • UNS N07718 Square Bar Exporter
  • WERKSTOFF NR. 2.4668 Bright Bar
  • ASTM B637 Type 718 Flat Bar Rolled Edge
  • ASME SB637 Inconel 718 Bar
  • 2.4668 Inconel Rods
  • Alloy 718 Black Bar Stockist
  • Inconel 718 Round Bar Price

Applications of Alloy 718 Round Bars

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry

We maintain ready stock of 718 Inconel Round Bar, Alloy 718 Hex Bar, Inconel 718 Square Bar, Alloy 718 Bright Bar, Inconel Alloy 718 Flat Bar and 718 Inconel Rods. Get in touch with us with your requirement for quick quote.