Titanium Grade 5 Sheets & Plates

  • Home
  • Titanium Grade 5 Sheets & Plates

Buy Large Or Small Quantity Titanium Gr 5 Sheet, Grade 5 Titanium Alloy Plates, UNS R56400 Sheets, Titanium Grade 5 Shim Sheets, Titanium R56400 Plates, Gr 5 Titanium Perforated Sheet Supplier in Mumbai, India.

ASTM B265 Titanium Gr 5 Hot Rolled Plate Manufacturer, Titanium 3.7165 Cold Rolled Plates, Titanium Grade 5 Strip, Titanium Alloy Gr 5 Coils, Ti. Alloy Grade 5 Plate, Titanium Alloy Gr 5 Chequered Plate, Werkstoff Nr. 3.7165 Sheets, Grade 5 Titanium Alloy Foils Manufacturer in India.

Hastelloy C22 Sheets & Plates

Jade Special Metals is a recognized manufacturer and supplier of Titanium Alloy Grade 5 Sheets & Plates, which has remarkably excellent dimensional steadiness and are relatively strong enough to a sour-gas atmosphere. Titanium Grade 5 Plates is very most often used in an array of atmospheres going from slightly oxidizing from side to side nonaligned and to temperately reducing environments. Titanium Grade 5 Coils is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Titanium Grade 5 Perforated Sheets works in a wide range of temperatures, and is available in multiple forms for a variety of products. Titanium Grade 5 Perforated Plates is a precipitation-hardenable copper-nickel alloy that unites corrosion resistance, non-magnetic and high strength properties. Titanium Grade 5 Perforated Coils has excellent mechanical properties from sub-zero temperatures up to about 480 Degree C. Titanium Grade 5 Slatting Sheets are generally used in doctor scrapers and blades, pump components, cable wrap and oil well drill collars, electronic components, marine instruments, springs, submarine parts and valve tray. Titanium Grade 5 Slatting Plates is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Titanium Grade 5 Slatting Coils is made up of nickel-copper and is resistant to sea water corrosion as well as to a variety of acids and other corrosive media.

Titanium Gr 5 Sheets & Plates Specifications

Standard : ASTM B265 / ASME SB265
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness : 0.3 mm to 120 mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Form : Sheets, Plates, Coils, Slatting Coils, Perforated Coils
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

“Contact Jade Special Metals today with your requirement for Titanium Gr 5 Sheet and Titanium Alloy Gr 5 Plates. We assure you of the best quote.

Titanium Gr 5 Sheets & Plates Equivalent Standard Grade

Titanium Gr 5 3.7165 R56400

Titanium Gr 5 Sheets & Plates Inventory

Perforated Sheets
Titanium Gr 5 Perforated Sheets
Chequred Plates
Titanium Gr 5 Chequred Plates
Shim Sheets
Titanium Gr 5 Shim Sheets
Titanium Gr 5 Coils
Titanium Gr 5 Foils
Titanium Gr 5 Strips

Titanium Gr 5 Sheets & Plates Chemical Composition

Grade Ti C Fe Al V O
Titanium Grade 5 90 min 0.25 max 6 min 4 min 0.02 max

Titanium Gr 5 Sheets & Plates Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Available Stock of ASTM B265 Titanium Gr 5 Sheets & Plates

  • Titanium Grade 5 Shim Sheets
  • Ti. Alloy Gr 5 Circles
  • Gr 5 Titanium Plain Sheets
  • Grade 5 Titanium Alloy Foils
  • UNS R56400 Polished Plates
  • WERKSTOFF NR. 3.7165 Perforated Sheet
  • ASTM B265 Grade 5 Titanium Sheet
  • Titanium Gr 5 Sheet Cut To Size
  • Titanium Grade 5 Sheet #4 Finish
  • Titanium Gr 5 Cold Rolled Plates
  • ASTM B265 Titanium Gr 5 Plate 2B Finish
  • Grade 5 Titanium Plate Mill Finish
  • UNS R56400 Plates
  • WERKSTOFF NR. 3.7165 Shim Sheets
  • ASTM B265 Titanium Alloy Gr 5 Coils
  • ASTM B265 Titanium Gr 5 Slitting Coil
  • Titanium Grade 5 CR Sheet
  • Titanium Alloy Gr 5 Strips
  • Gr 5 Titanium #4 Finish Sheets
  • Grade 5 Titanium Alloy Foils
  • UNS R56400 Sheet Supplier
  • WERKSTOFF NR. 3.7165 HR Plates
  • Grade 5 Titanium Sheet
  • Ti. Alloy Gr 5 #8 Finish Plates
  • Titanium Alloy Gr 5 Plate Manufacturer
  • Gr 5 Titanium Laser Cutting Sheet
  • Titanium Grade 5 Sheets
  • Gr 5 Titanium Sheets Distributor
  • UNS R56400 Plates Exporter
  • WERKSTOFF NR. 3.7165 CR Sheets
  • ASTM B265 Titanium Gr 5 Sheet and Plate
  • ASTM B265 Grade 5 Titanium Plate
  • 3.7165 Titanium Perforated Sheet
  • Titanium Gr 5 2B Finish Plates Stockist
  • Titanium Alloy Grade 5 Sheets
  • Titanium Grade 5 Sheets Price

Applications of Titanium Gr 5 Sheets & Plates

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry

We maintain ready stock of Gr 5 Titanium Sheet, Titanium Alloy Gr 5 Plates, Titanium Grade 5 Coils, Titanium Alloy Gr 5 Shims, Titanium Grade 5 Strips and Gr 5 Titanium Foils. Get in touch with us with your requirement for quick quote.