Nickel 201 Round Bar

  • Home
  • Nickel 201 Round Bar

Nickel Alloy N02201 Rods, Nickel 201 Hex Bar, Buy Large Or Small Quantity Nickel 201 Round Bar, UNS N02201 Round Bars, Alloy 201 Bar Stock, 201 Nickel Alloy Bars, 201 Nickel Alloy Round Bars Supplier in Mumbai, India.

Nickel Alloy 201 Square Bar, Nickel Alloy 201 Flat Bars, Nickel 201 Round Bar, Nickel 2.4068 Hollow Bar, ASTM B160 Alloy 201 Bright Bar Manufacturer, Werkstoff Nr. 2.4068 Bars, Nickel Alloy 201 Forged Bar Manufacturer in India.

Round Bar

Jade Special Metals is an eminent exporter of Nickel Alloy 201 Round Bars, which is acid resistant and has good weldability. Nickel 201 Flat Bars retains strength over an extensive temperature range, striking for high temperature applications. Nickel 201 Square Bars and its aluminum would give in to creep as a result of thermally-induced crystal vacancies. Nickel 201 Threaded Bars is a grade that consists mainly of Chromium, Iron and Nickel but as well contains Titanium, Molybdenum and Copper. That composition in Nickel 201 Hollow Bars offers excellent resistance to a range of corrosive atmospheres. Nickel 201 Hexagonal Bars has approximately great confrontation to many harsh surroundings, such as fighting, crevice erosion, intergranular erosion, and pressure- erosion very. Nickel 201 Triangular Bars is used in oil and gas or petrochemical applications as well as some marine and acidic environments. Nickel 201 Bars has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion. Many companies in a wide range of industries utilize Nickel 201 Rods for a number of applications. Ni-201 Round Bars is used in Industrial furnace components and equipment, Petrochemical and chemical processing. Nickel UNS N02201 Round Bars is also used in Equipment for Heat-Treating, Pressure vessels and heat exchangers, Hydrocarbon cracking, etc. These Ni-201 Flat Bars are being sourced by using high quality of raw material and makes sure to provide durability of highest quality of industry standard products.

Nickel Alloy 201 Round Bars Specifications

Standard ASTM B160, AMS 5513, AMS 5511, AMS 5647
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Rectangular Bars Section 3.0 to 12.0mm thickness
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangular Size 33 x 30mm to 295 x 1066mm
Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed
Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing Bar cutting to 650mm
Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.

Nickel Alloy 201 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

“Contact Jade Special Metals today with your requirement for Nickel 201 Round Bars and Alloy 201 Rods. We assure you of the best quote.

Nickel 201 Round Bars Equivalent Standard Grade

Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

Nickel 201 Round Bars Inventory

Hexagonal Bar
Nickel 201 Hex Bar
Square Bar
Nickel 201 Square Bar
Bright Bar
Nickel 201 Bright Bar
Threaded Bar
Nickel 201 Threaded Bar
Flat Bar
Nickel 201 Flat Bar
Rectangular Bar
Nickel 201 Rectangular Bar

Nickel 201 Round Bar Chemical Composition

Grade C Mn Si S Fe Ni Cu
Nickel Alloy 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Alloy 201 Round Bars Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Available Stock of ASTM B160 Alloy 201 Round Bars

  • Nickel 201 Cold Drawn Bars
  • Alloy 201 Hexagonal Bar
  • 201 Nickel Alloy Square Bars
  • UNS N02201 Round Bar
  • WERKSTOFF NR. 2.4068 Bars
  • ASTM B160 Nickel 201 Polished Bar
  • Nickel 201 Rectangular Bar
  • Nickel Alloy 201 Forged Bars
  • Alloy 201 Half-Round Bar
  • ASTM B160 Type 201 Hex Bar
  • 201 Nickel Alloy Flat Bar
  • UNS N02201 Rods
  • WERKSTOFF NR. 2.4068 Triangle Bar
  • ASME SB160 Alloy 201 Bright Bar
  • ASTM B160 Alloy 201 Precision Ground Bar
  • Nickel 201 Bright Round Bar
  • Nickel Alloy 201 Threaded Bars
  • 201 Nickel Alloy Hollow Bar
  • Nickel Alloy 201 Rods
  • UNS N02201 Flat Bars Supplier
  • WERKSTOFF NR. 2.4068 Flat Bars
  • Nickel Alloy 201 Round Bar
  • Alloy 201 Cold Drawn Round Bar
  • Nickel 201 Bars Manufacturer
  • 201 Nickel Alloy Hex Bars
  • ASTM B160 Type 201 Cold Rolled Bar
  • 201 Nickel Bar Distributor
  • UNS N02201 Square Bar Exporter
  • WERKSTOFF NR. 2.4068 Bright Bar
  • ASTM B160 Type 201 Flat Bar Rolled Edge
  • ASME SB160 Nickel 201 Bar
  • 2.4068 Nickel Alloy Rods
  • Alloy 201 Black Bar Stockist
  • Nickel Alloy 201 Round Bar Price

Applications of Alloy 201 Round Bars

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry

We maintain ready stock of 201 Nickel Round Bar, Alloy 201 Hex Bar, Nickel Alloy 201 Square Bar, Alloy 201 Bright Bar, Nickel Alloy 201 Flat Bar and 201 Nickel Rods. Get in touch with us with your requirement for quick quote.