Duplex Steel UNS S32506 Round Bar

  • Home
  • Duplex Steel UNS S32506 Round Bar

Buy Large Or Small Quantity Duplex Steel S32506 Round Bar, Duplex Steel 32506 Hex Bar, ASTM A276 Grade S32506 Duplex Black Bar, Duplex Steel UNS S32506 Rods, UNS S32506 Round Bars, SAF 32506 Bars, Duplex Steel S32506 Round Bars Supplier in Mumbai, India.

Duplex Steel 1.4462 Hollow Bar, UNS S32506 Square Bar, ASTM A276 Duplex Steel S32506 Bright Bar Manufacturer, Duplex Steel 32506 Round Bar, Duplex Steel S32506 Flat Bars, Werkstoff Nr. 1.4462 Bars, Duplex Steel S32506 Forged Bar Manufacturer in India.

Stainless Steel 904L Round Bar

Jade Special Metals is a prominent distributor of Duplex Steel UNS S32506 Round Bars, which demonstrates superior erosion-corrosion resistance. The chromium in Duplex Steel UNS S32506 Flat Bars gives resistance to oxidizing environments such as nitric acid. Duplex Steel UNS S32506 Square Bars are used for processing pharmaceuticals, food, gasoline, solvents, plastics, explosives, synthetic fibers and many other products. Duplex Steel UNS S32506 Threaded Bars are also used in Mixing Tanks, Heat Exchangers, Process Piping, Pickling Equipment, Pumps, valves, fasteners, and fittings. Duplex Steel UNS S32506 Hollow Bars has very good resistance to chloride-ion induced stress-corrosion cracking. Meanwhile, superior finishes in Duplex Steel UNS S32506 Hexagonal Bars may be obtained using set-up and process speeds and feeds normally employed in austenitic alloys. Due to its excellent corrosion resistance, Duplex Steel UNS S32506 Triangular Bars is a suitable material for service in environments containing chlorides and hydrogen sulfide. Though, because descaling is rather difficult in Duplex Steel UNS S32506 Bars, alkali involvement before acid preserving, and if possible, gunshot blasting is very effective. Duplex Steel UNS S32506 Rods will often perform well in environments which cause premature failure of austenitic grades. It has superior resistance to sea water. Due to its higher corrosion resistance Duplex S32506 Round Bars has better fatigue strength in corrosive environments than that of other austenitic stainless steel specifications. Duplex S32506 Bars has better corrosion resistance than that of other austenitic grades with higher resistance to stress corrosion cracking.

Duplex Steel UNS S32506 Round Bars Specifications

Dimensions : ASTM, ASME, DIN, BS, EN, IS, AMS, JIS, IBR & Other
International Standards.
Standard : ASTM A276, ASTM A479
Size : 6 mm to 120 mm
Diameter : 6 mm to 350 mm Diameter
Thickness : 100 mm to 600 mm Length
Tolerance : +/-0.2 mm or as per clients’ requirements
Length : 1 Meter to 6 Meters, Custom cut lengths
Form : Round, Square, Hex, Flat, Rectangular, Forged, Rod etc.
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish,
BA Finish

Duplex Steel UNS S32506 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

“Contact Jade Special Metals today with your requirement for Duplex Steel UNS S32506 Round Bars and SAF 32506 Rods. We assure you of the best quote.

Duplex Steel UNS S32506 Round Bars Equivalent Standard Grade

STANDARD WERKSTOFF NR. UNS
Duplex 32506
1.4462 S32506

Duplex Steel UNS S32506 Round Bars Inventory

Hexagonal Bar
Duplex Steel S32506 Hex Bar
Square Bar
Duplex Steel S32506 Square Bar
Bright Bar
Duplex Steel S32506 Bright Bar
Threaded Bar
Duplex Steel S32506 Threaded Bar
Flat Bar
Duplex Steel S32506 Flat Bar
Rectangular Bar
Duplex Steel S32506 Rectangular Bar

Duplex Steel S32506 Round Bar Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Cu
S32506 0.03 1 0.9 0.04 0.015 24-26 3-3.5 5.5-7.2 0.08-0.2

Duplex Steel 32506 Mechanical Properties

Grade Tensile Strength MPa Yield Strength MPa Elongation in 2in.or 50mm,% Hardness Rockwell B
S32506 620 450 18 32

Available Stock of ASTM A276 Duplex Steel UNS S32506 Round Bars

  • Duplex Steel S32506 Cold Drawn Bars
  • Duplex S32506 Hexagonal Bar
  • Duplex Steel S32506 Square Bars
  • UNS S32506 Round Bar
  • WERKSTOFF NR. 1.4462 Bars
  • ASTM A276 Duplex Steel S32506 Polished Bar
  • Duplex Steel S32506 Rectangular Bar
  • Duplex Steel S32506 Forged Bars
  • S32506 Half-Round Bar
  • ASTM A276 Duplex Steel 32506 Hex Bar
  • Duplex Steel S32506 Flat Bar
  • UNS S32506 Rods
  • WERKSTOFF NR. 1.4462 Triangle Bar
  • ASTM A276 SAF 32506 Bright Bar
  • ASTM A276 Duplex 32506 Precision Ground Bar
  • Duplex Steel 32506 Bright Round Bar
  • Duplex Steel S32506 Threaded Bars
  • Duplex Steel S32506 Hollow Bar
  • Duplex Steel S32506 Rods
  • UNS S32506 Flat Bars Supplier
  • WERKSTOFF NR. 1.4462 Flat Bars
  • Duplex Steel 32506 Round Bar
  • Duplex S32506 Cold Drawn Round Bar
  • Duplex Steel 32506 Bars Manufacturer
  • Duplex Steel S32506 Hex Bars
  • ASTM A276 Duplex S32506 Cold Rolled Bar
  • Duplex Steel S32506 Bar Distributor
  • UNS S32506 Square Bar Exporter
  • WERKSTOFF NR. 1.4462 Bright Bar
  • ASTM A276 Duplex 32506 Flat Bar Rolled Edge
  • ASTM A276 Duplex Steel S32506 Bar
  • Duplex Steel 1.4462 Rods
  • SAF 32506 Black Bar Stockist
  • Duplex Steel 32506 Round Bar Price

Applications of Duplex Steel S32506 Round Bars

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry
Industry

We maintain ready stock of S32506 Duplex Steel Round Bar, SAF 32506 Hex Bar, Duplex Steel 32506 Square Bar, Duplex Steel 32506 Bright Bar, Duplex S32506 Flat Bar and UNS S32506 Duplex Rods. Get in touch with us with your requirement for quick quote.