Alloy 24 Round Bar

  • Home
  • Alloy 24 Round Bar

Alloy 24 Hex Bar, Alloy Steel EN-24 Rods, Buy Large Or Small Quantity Alloy 24 Round Bar, EN24 Round Bar, Alloy 24 Bar Stock, Alloy 24 Round Bars Supplier in Mumbai, India.

Alloy 24 Bright Bar Manufacturer, Alloy 24 Hollow Bar, Alloy 24 Square Bar, Alloy 24 Flat Bars, EN24 Steel Bar, Alloy 24 Forged Bar Manufacturer in India.

Alloy 20 Round Bar

Jade Special Metals is an eminent exporter of Alloy 24 Round Bars, which is machinable in the rolled and cast form at low cutting speeds and coolant is required. Typical uses of Alloy 24 Flat Bars are in aerospace and chemical industries. Alloy 24 Square Bars are known for the features like Corrosion resistance, Intergranular attack, Corrosion cracking, Pitting, Stress corrosion cracking and so on. Alloy 24 Threaded Bars are being used various applications such as in Components Exposed to Sour Gas, Bleach Plants in the Paper Industry. Alloy 24 Hollow Bars is also used in Equipment for Flue-Gas Desulfurisation Plants, Heat Exchangers, Sulfuric Acid Reactors, and Evaporators Filters and Mixers. Alloy 24 Hexagonal Bars hosts of some amazing features like corrosion resistance, good strength, ductibility and so on. Alloy 24 Triangular Bars also has high tensile strength, is quite durable, and exceptionally resistant to rusting. Alloy 24 Rods is widely used in the marine industry because of its in built power to withstand abrasive environment. UNS S34565 Round Bars covers chromium, molybdenum, tungsten, and firm which makes the blend resistant to erosion in stagnant or graceful seawater. WNR 1.4565 Round Bars is one of the most widely used nickel-based alloys due to its high resistance to oxidation and high temperature strength. UNS S34565 Rods is commonly used in gas turbine engine components, furnace applications and any type of combustion zone sections such as tailpipes, cabin heaters and heat-treating equipment.

Alloy 24 Round Bars Specifications

Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Rectangular Bars Section 3.0 to 12.0mm thickness
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangular Size 33 x 30mm to 295 x 1066mm
Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed
Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing Bar cutting to 650mm
Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.

Alloy 24 Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

“Contact Jade Special Metals today with your requirement for Alloy 24 Round Bars and Alloy 24 Rods. We assure you of the best quote.

Alloy 24 Round Bars Inventory

Hexagonal Bar
Alloy 24 Hex Bar
Square Bar
Alloy 24 Square Bar
Bright Bar
Alloy 24 Bright Bar
Threaded Bar
Alloy 24 Threaded Bar
Flat Bar
Alloy 24 Flat Bar
Rectangular Bar
Alloy 24 Rectangular Bar

Available Stock of Alloy 24 Round Bars

  • Alloy 24 Cold Drawn Bars
  • Alloy 24 Hexagonal Bar
  • Alloy 24 Square Bars
  • EN24 Polished Bar
  • Alloy EN24 Rectangular Bar
  • Alloy 24 Forged Bars
  • Alloy 24 Half-Round Bar
  • Alloy 24 Hex Bar
  • Alloy 24 Flat Bar
  • Alloy Steel EN-24 Triangle Bar
  • Alloy 24 Bright Bar
  • Alloy 24 Precision Ground Bar
  • Alloy 24 Threaded Bars
  • Alloy 24 Hollow Bar
  • Alloy 24 Rods
  • EN 24 Flat Bars Supplier
  • Alloy 24 Cold Drawn Round Bar
  • Alloy 24 Bars Manufacturer
  • Alloy 24 Cold Rolled Bar
  • Alloy 24 Bar Distributor
  • EN 24 Square Bar Exporter
  • Alloy 24 Flat Bar Rolled Edge
  • Alloy 24 Black Bar Stockist
  • Alloy 24 Bright Round Bar
  • EN24 Round Bar
  • Alloy 24 Round Bar Price

Applications of Alloy 24 Round Bars

  • Pipeline Engineering
  • Marine Industry
  • Chemical Industry
  • Oil & gas industry
  • Mechanical Engineering
  • Plant Engineering
  • Petrochemical Industry
  • Power Industry
  • Aerospace
  • Food Processing Industry

We maintain ready stock of Alloy 24 Round Bar, Alloy 24 Hex Bar, Alloy 24 Square Bar, Alloy 24 Bright Bar, Alloy 24 Flat Bar and EN 24 Rods. Get in touch with us with your requirement for quick quote.